Publicidad
Idiomas disponibles
Idiomas disponibles
Note
There may be differences in focus when you use zoom
0
after focusing. Focus again.
While shooting video, in some situations, AF operation
0
and stabilizer operation of the lens may be heard. It is
recommended to record as follows:
– Set to MF to record
– Turn off the image stabilizer and use a tripod for
recording
Attaching the Lens
For information on how to attach the lens, refer to the
operating instructions for your digital camera.
Attach the lens after turning off the digital camera.
0
Attach the lens after removing
0
the lens rear cap.
After removing the lens from
0
the digital camera, be sure to
attach the lens cap and lens
rear cap to prevent dust and
other particles from
accumulating on or entering
the lens.
∫ Attaching the lens hood
1
Align mark A (
the lens hood with the
mark on the tip of the
lens.
2
Rotate the lens hood in
the direction of the
arrow to align mark B
(
) on the lens hood
with the mark on the tip
of the lens.
Attach the lens hood by
0
rotating it until it clicks.
∫ Removing the lens hood
While pressing the lens
hood button C, rotate the
lens hood in the direction
of the arrow and then
remove it.
) on
DVQX2162
(ENG)
21
Publicidad
