Descargar Imprimir esta página

SNOWJOE sunjoe SPX2690-MAX Manual Del Operador página 6

Publicidad

Idiomas disponibles

Idiomas disponibles

Unpacking
Carton Contents
• Electric pressure washer
• Handle
• Trigger gun holder
• Power cord holder
• Screws (x2)
• Wheels (x2)
• Spray wand
• Trigger gun
• Foam cannon
• High-pressure hose
• Quick-Connect nozzles (0º, 15º & 40º)
• Needle clean-out tool (included with manual packet)
• Manual with registration card
1. Carefully remove the electric pressure washer and check
to see that all of the above items are supplied.
2. Inspect the product carefully to make sure no breakage or
damage occurred during shipping. If you find damaged or
missing parts, DO NOT return the unit to the store. Please
call the Snow Joe
+ Sun Joe
®
1-866-SNOWJOE (1-866-766-9563).
NOTE: Do not discard the shipping carton and packaging
material until you are ready to use the pressure washer.
The packaging is made of recyclable materials. Properly
dispose of these materials in accordance with local
regulations or save the packaging for long-term product
storage.
IMPORTANT! The equipment and packaging material are not
toys. Do not let children play with plastic bags, foils, or small
parts. These items can be swallowed and pose a suffocation
risk!
m
WARNING!
Do not connect to power supply until
assembly is complete. Failure to comply could result in
accidental starting and possible serious personal injury.
Assembly
Tools required: Phillips head screwdriver
1. Slide the handle into the top of the pressure washer, and
attach it using two screws as shown (Fig. 1).
customer service center at
®
Fig. 1
2. Slide the trigger gun holder into position (Fig. 2).
Fig. 2
Trigger
gun
holder
3. Slide the power cord holder into position (Fig. 3).
Fig. 3
6
Handle
Screws
Power
cord
holder

Publicidad

loading