SNOWJOE sunjoe SPX2690-MAX Manual Del Operador página 7

4. Install both wheels into either side of the pressure washer
(Fig. 4).
Fig. 4
Wheel
5. To connect the spray wand to the trigger gun, insert the
locking lugs on the spray wand into the end of the trigger
gun. Twist clockwise to lock them together (Fig. 5).
Fig. 5
Locking lugs
Spray wand
6. Connect the high-pressure hose to the trigger gun. Twist
to secure the connection (Fig. 6).
Fig. 6
Trigger gun
7. Connect the other end of high-pressure hose to the water
Fig. 7
High-pressure hose
m
Bursting hoses may cause injury. Examine hoses regularly and
replace if damaged. Do not attempt to mend a damaged hose.
8. Connect the garden hose adapter (female coupler) to
Trigger
Fig. 8
gun
High-pressure
hose
7
outlet on the pressure washer and tighten securely (Fig. 7).
Water outlet
WARNING!
Keep hose away from sharp objects.
the water inlet of the pressure washer, then thread your
garden hose (male end) into the water inlet
The garden hose must have an internal diameter of at
least 13 mm (1/2 in.) and must be reinforced. The water
supply flow rate must be at least equal to the pressure
washer's delivery capacity.
(Fig. 8).
Water inlet
Garden hose