Descargar Imprimir esta página

Volpi PV360 Manual Del Usuario página 33

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 91
10. Charging the Battery
Do not dispose battery under high temperature or vibration environment to avoid liquid
leakage from the battery.
isconnect the battery from tool before charging.
D
Always make sure the battery is dry and clean before charging.
Make sure the battery is fully charged before first time using.
The battery is not fully charged when you buy, you must charge 3-4 hours before using first
time.
Before recharging the battery, check the remaining charge on the display.
Need to replace battery if battery running time is not enough. Users can only use the original
equipment manufactured by the customer center (OEM) battery pack.
Keep safety rules and environment protection information in mind all the time.
10.1. Battery charging procedure.
Charge at temperature of +10°C~+22°C indoor.
The three-way battery charger allows you to recharge the three batteries supplied at the same
time.
Make sure specifications on battery and adapter matched before charging.
The red LED light on the charger indicates the battery is charging, the green LED light indicates it
is fully charged. The approximate charging time is 3 to 4 hours (charging time for 2 fully
discharged batteries at the same time), do not keep the batteries connected longer than
necessary as they may damage them.
The charger has three outputs, you can charge up to 3 batteries simultaneously. The charging
time is proportional to the number of batteries connected and the state of their charge.
Monitor the charging time by the LED indicator (red light in charge, green light end of charge).
Disconnect the battery charger connectors from the batteries after charging is complete.
Make sure the battery is recharged at least every 3 months when not in use. Do not store the
machine with the battery connected.
11. Working environment
• Keep temperature of environment at 10°C ~ 22°C when charging battery, 0°C ~ +45°C when
battery is working.
• Keep tool at temperature of 0°C ~ +60°C when working
• Do not use in explosive atmosphere or near flammable substances or gases.
• Do not use in case of rain or on wet branches
33

Publicidad

loading