Publicidad
Idiomas disponibles
Idiomas disponibles
Operation
Bagger Usage
1.
While mowing, periodically stop and check
the viewing window on top of the grass
catcher cover. See Figure 5-1.
Figure 5-1
NOTE: To ensure longevity and reliable
performance do not allow grass bags to fill
over the edge of the rim before emptying.
2.
When both grass bags are full, place the
tractor on a firm, level surface, disengage the
PTO, turn the tractor engine off and set the
parking brake.
3.
Open the grass catcher cover by pushing in
on the rear, right-side tab and rear left-side
tab, as seen in 1 of Figure 5-2, and lifting the
cover from the rear of the bagger cover, 2. Do
not remove the chute tube assembly from the
tractor.
Figure 5-2
4.
Remove the grass bags by lifting these up (1
in Figure 5-3) and moving the bags away from
the bag support assembly (2).
2
Figure 5-3
5.
Empty the grass clippings at a proper disposal
site, use the handle at the bottom of each
grass bag. Holding the bag firmly, empty the
contents.
6.
Open the grass catcher as described in step
3, and secure the grass bags back into place
in the same orientation in which they were
removed. Close the lid and restart your tractor.
Resume cutting as needed.
7.
Retighten all wing knobs periodically
throughout the season.
1
5
9
Publicidad
