Publicidad
Idiomas disponibles
Idiomas disponibles
5....-05-DB 2779
•
Clean the ironing base with a slightly damp cloth.
•
Fill the water tank (8) through the filler aperture (6) with pure water (up to
degree of hardness 2). If the tap water is harder please use distilled water.
NOTE: Only clothes should to be ironed with this machine.
Ironing without steam (steam jet regulator on
1. Place the iron on its stand.
2. Press down the steam regulator (5) and then turn the symbol
3. Electrical connection
Make sure that the iron voltage (see name plate) and the line voltage match.
4. Sort out the garments according to their ironing temperatures. Start with the
lower temperatures. It is set with the thermostat (1):
•
Synthetics, silk
• •
Wool
• • •
Cotton, linen
5. Only connect the machine to a properly installed safety socket, 230 V/50 Hz.
6. The control lamp (2) lights up. As soon as it shuts off, the set temperature is
reached. Now you can start to iron.
7. Always pull the plug out of the socket after using the iron.
Steam Ironing (
For this a high temperature is needed (cotton, linen).
8. The quantity of steam can be regulated using the steam quantity regulator (5).
Press down the steam regulator, select a setting and then turn this to the mark.
medium steam quantity
Extra steam can be added with the steam jet function (4). Caution: the steam is
hot. Danger of scalding!
When ironing at low temperatures, make sure that you reduce the quantity of steam
or iron without steam.
Spray Function (
In order to moisten a section to be ironed press the spray button (3).
Vertical Steam
This can be used to produce a jet of steam in a vertical direction.
11.03.2003 10:13 Uhr
First Use of the Machine
Using the Machine
(low temperature)
(medium temperature)
(high temperature)
)
)
Seite 29
).
to the mark.
large steam quantity
GB
29
Publicidad
