Publicidad
Idiomas disponibles
Idiomas disponibles
THE LED DISPLAY
The LED display shows the settings, estimated time remaining, options, and status messages for
your washer. When the washer is turned on, the display will illuminate.
A
CYCLE COMPLETION INDICATOR
This portion of the display shows which
stage of the wash cycle is currently
underway (LOAD SENSING, WASH, RINSE
or SPIN).
ESTIMATED TIME REMAINING
B
When the START/PAUSE button is pressed,
the washer automatically detects the wash
load (weight) and optimizes the washing
time, based on the selected cycle and
options. The display will then indicate the
estimated time remaining for the selected
wash cycle.
NOTE: The cycle time displayed may appear
much longer than that of a top-loading
washer. The displayed time is for the
complete cycle, rather than just the agitation
portion of the cycle, as is typically shown on
a top-loading washer.
A
C
B
D
DOOR LOCk INDICATOR
C
Indicates that the door is locked. The washer
door will lock while the washer is operating.
The door can be unlocked by pressing the
START/PAUSE button to stop the washer.
NOTE: If the temperature in the washer is
too high, the door cannot be unlocked until
the washer has cooled. If the water level is
too high, select the DRAIN & SPIN cycle to
drain excess water. Do not try to force open
the door.
D
DELAY WASH INDICATOR
This indicator shows that the washer has
been set for DELAY WASH. The washer will
start automatically after the set delay time
has passed
H O W TO U S E
21
Publicidad
