Taking selfies
♦
Release the lock of the telescopic shaft 4 by turning it
anticlockwise.
♦
Pull out the telescopic shaft 4 to the desired length. Turn the
individual elements of the telescopic shaft 4 clockwise to
lock them in place.
♦
If you want to unlock the telescope shaft 4 again, turn the
individual elements in the opposite direction (anticlockwise).
♦
Switch on the camera function on your smartphone.
♦
Press the
smartphone will take a picture. The operating LED 0 briefly
flashes blue once.
NOTE
►
If the
button q is not pressed for approx. 6 minutes, the
remote release 8 switches off automatically.
Using the mini tripod
♦
Screw the mini tripod 1 into the ¼ inch thread 7 on the
bottom of the handle 5.
♦
Always pull the legs of the mini tripod 1 fully apart for
maximal stability.
SSBS 3.0 A2
button q on the remote release 8. Your
GB │ IE
│
11
■