Have A Physician Interpret Your Measurements; The Measuring Technology Of The Device - Welby 14942 Manual De Instrucciones

USA
Tips for obtaining accurate measurements
− Do not measure your blood pressure if you are under stress or are
tense.
− Measure your blood pressure at normal body temperature and not if
you are too hot or too cold.
− Wait around fi ve minutes before repeating the measurement.
If you record a reading that differs greatly from your normal blood
pressure measurement, you should take another measurement around
five minutes later. This will allow you to rule out any of the factors
mentioned above, which could result in an incorrect measurement.

Have a physician interpret your measurements

After you measure your blood pressure, a physician or other licensed
health care professional should interpret the results and diagnose
them. The doctor will tell you which blood pressure level is normal for
you, and which abnormalities you should report if they occur.
CAUTION!
Risk of injury.
Danger from self-treatment or self-medication. Clarify any
abnormal readings with your physician.
− Only take medication as prescribed by your physician.
Inaccurate measurement results can occur with patients with the
following conditions: high blood pressure, diabetes, liver disease,
hardened arteries, heart rhythm disturbances (arrhythmias), poor
circulation, etc.

The measuring technology of the device

Your blood pressure measurement device contains high-quality
technical components and materials for measuring pressure, processing
the signals and displaying the reading of the values on a liquid crystal
display. It also measures and displays your pulse rate.
20
866-633-4660
USA
AFTER SALES SUPPORT
us.info@medion.com