Select Memory; Putting On The Cuff; Recommended Posture When Measuring - Welby 14942 Manual De Instrucciones

Select memory

You can save 60 measurement readings in each of the two memories
and .
1. To change the memory, press and hold the button with the device
switched off until the desired memory or
2. Press the button to switch off the device.
For the next measurement, the preset memory is used.

Putting on the cuff

NOTICE!
Preferably, take the measurements on your left wrist. If, however, this is
not possible. take the measurement on your right wrist.
1. Remove clothing from your lower arm.
The BC5000 cuff is suitable for a wrist circumference of 5.25" to 5.5" (see
fig. D).
2. Attach the wrist cuff in such a way that it is approx. 0.5" away from the
palm of your hand (see fig. D).
3. Wrap the cuff around your wrist so that it is firmly seated yet
comfortable and no gap remains between cuff and wrist (see fig. E).

Recommended posture when measuring

1. Sit down comfortably when measuring your blood pressure, breathe
deeply and relax.
2. Support your elbow and hold your arm so that the wrist cuff is at the
same height as your heart. Turn your palm upwards. (see fig. F)
An incorrect wrist position can adversely affect the measurement.
− Remain calm, do not cramp your hand, do not make a fi st and do not
talk during the measurement.
− Do not grasp the cuff with your other hand during the measurement.
It could give a false reading.
AFTER SALES SUPPORT
866-633-4660
USA
Putting on the cuff
is displayed.
us.info@medion.com
USA
23