Starmix haaga 375 Manual De Instrucciones Original página 18

General
1. General
This operating manual is a part of the device
Sweeping Machine haaga 375 (year built: from
2017), Kehrmaschine haaga 477 Profi (year built:
from 2017) and Sweeping Machine haaga 497
Profi (year built: from 2017) and is valid only for
EN
the named devices.
This operating manual provides important
information for the safe and effi cient use of the
machine.
A requirement for safe operation of the machine
is the adherence to all of the safety and operation
instructions provided.
• Read the operating manual carefully before
using the device.
• Read the safety instructions!
• Keep the operating manual safe and
accessible during the lifespan of the device.
• Pass the operating manual onto any
subsequent owner or user of the device.
1.1 Address
Haaga Kehrsysteme GmbH
D-73230 Kirchheim/Teck
Tel.: +49 (0) 70 21/36 42
Fax: +49 (0) 70 21/7 43 25
info@haaga-gmbh.de
www.haaga-gmbh.de
1.2 Conventions
To be able to work optimally with the operating
manual, please note the following explanations of
the typographical conventions.
Numbering
• The texts shown are fi rst level numbering
points.
Work sequence
1. Step 1 of the work sequence
2. Step 2 of the work sequence
3. Step 3 of the work sequence
The sequence of the work steps must be
observed.
Tip
» Tips and notes (not machine damage) are
shown like this.
18
haaga 375
haaga 477 / 497 Profi
1.3 Symbols and labels
All warnings and safety instructions must be
complied with! When working, always act with
caution to prevent accidents, personal injury and
damage to property!
Safety instructions
SIGNAL WORD
Type and source of hazard Type and source of hazard
Possible consequences Possible consequences
• Measures for avoiding danger • Measures for avoiding danger
Risk level
Risk level
DANGER
WARNING
CAUTION
NOTE
1.4 Limitation of Liability
Haaga Kehrsysteme GmbH does not accept any
liability for damage and consequential damage
caused by the following points:
• Failure to observe the operating instructions
• Use of nonapproved replacement parts /
wrong spare parts / spare parts that do not
correspond to the manufacturer's specifi cation
• Unauthorized changes, additions to and
modifi cations to the device
1.5 Warranty
The provisions that are described in the general
terms and conditions of Haaga Kehrsysteme
GmbH apply.
Probability Consequences
of occurrence in the event of
noncompliance
Direct Death, serious injury
Possible Death, serious injury
Possible Slight injury
Possible material damage