Publicidad
Idiomas disponibles
Idiomas disponibles
en-us Operating the appliance
1Operating the appliance
S witching the appliance on
O p e r a t i n g t h e a p p l i a n c e
Press ÿ power button.
1.
The appliance begins to cool. The warning sound,
the flashing freezer
compartment temperature display and the
alarm off button indicate that the freezer
compartment is still too warm.
Press alarm off button.
2.
The warning sound switches off.
Set the required temperature.
3.
~ "Setting the temperature" on page 20
Operating tips
When the appliance has been switched on, it may
■
take several hours until the set temperatures have
been reached. Do not put in any food until the
selected temperature has been reached.
The fully automatic NoFrost system ensures that
■
the appliance remains frost-free. Defrosting is not
required.
The front sides of the housing are partly heated
■
slightly. This prevents condensation in the area
of the door seal.
Switching off and disconnecting the
appliance
Switching off the appliance
Press ÿ power button.
■
The appliance is no longer cooling.
Disconnecting the appliance
If you are not going to use the appliance for a long
period:
Interrupt the water supply to the appliance.
1.
Take all food out of the appliance.
2.
Press ÿ power button.
3.
The appliance is no longer cooling.
Pull out the power plug or switch off the fuse.
4.
Remove the water filter, empty the ice cube bin
5.
and clean the appliance.
~ "Cleaning" on page 28
Leave the doors and drawers of the appliance
6.
open.
Setting the temperature unit
You can choose between the units °C and °F:
Press menu button.
1.
Press °C/°F button.
2.
Press Y/X Settings button until settings display
3.
shows °C or °F.
Press menu button.
4.
The setting is saved.
20
Setting the temperature
Recommended temperature
Refrigerator compartment:
Cool-fresh compartment:
Freezer compartment:
Cooling compartment
Keep pressing the Y/X button until the display
■
indicates the required temperature.
Freezer compartment
Keep pressing Y/X button until the display
■
indicates the required temperature.
Setting cool-fresh compartment
You can set the temperature and the humidity of the
cool-fresh compartment using pre-defined storage
settings:
Open the cool-fresh compartment drawer.
1.
Press any button of the cool-fresh compartment
2.
controls.
Press and hold the unlock cool-fresh
3.
compartment button until the light bar is fully
illuminated.
Press the required storage setting button.
4.
Close the cool-fresh compartment drawer.
5.
The setting is saved.
Super cooling
Super cooling cools the refrigerator compartment as
cold as possible.
Switch on super cooling, e.g.:
Before placing large quantities of food into the
■
compartment
For cooling drinks quickly
■
When super cooling is switched on, increased
Note:
operating noises may occur.
After approx. 6 hours, the appliance switches to
normal operation.
Switch super cooling on/off:
Press Û super button refrigerator compartment.
■
When super cooling is switched on, the button
lights up.
37 °F (3 °C)
32 °F (0 °C)
0 °F (–18 °C)
Publicidad
