Publicidad
Idiomas disponibles
Idiomas disponibles
en
ENGLISH
11. Repairs
Repairs to electrical tools must ONLY be
carried out by qualified electricians!
Contact your local Metabo representative if you
have Metabo power tools requiring repairs. See
www.metabo.com for addresses.
You can download a list of spare parts from
www.metabo.com.
12. Environmental Protection
Observe national regulations on environmentally
compatible disposal and on the recycling of disused
machines, packaging and accessories.
Only for EU countries: never dispose of
power tools in your household waste! Used
power tools must be collected separately and
handed in for environmentally compatible recycling
in accordance with European Directive 2002/96/EC
on waste electrical and electronic equipment and its
implementation in national legal systems.
13. Technical Specifications
Explanatory notes on the specifications on page 3.
Subject to change in accordance with technical
progress.
T
= Maximum material thickness in wood
1
T
= Maximum material thickness in non-
2
ferrous metals
T
= Maximum material thickness in sheet
3
steel
n
= Stroke rate at idle speed
0
P
= Rated input power
1
P
= Power output
2
m
= Weight without mains cable
Measured values determined in conformity with
EN 60745.
Machine in protection class II
~
AC Power
The technical specifications quoted are subject to
tolerances (in compliance with the relevant valid
standards).
Emission values
These values make it possible to assess the
emissions from the power tool and to compare
different power tools. The actual load may be higher
or lower depending on the operating conditions, the
condition of the power tool or the accessories.
Please allow for breaks and periods when the load
is lower for assessment purposes. Arrange
protective measures for the user, such as
organisational measures based on the adjusted
estimates.
Vibration total value (vector sum of three directions)
determined in accordance with EN 60745:
a
= Vibration emission value
h,CM
(Sawing sheet metal)
a
= Vibration emission value
h,CW
(Sawing wood)
K
= Uncertainty (vibration)
12
h,...
Typical A-effective perceived sound levels:
L
= Sound-pressure level
pA
L
= Acoustic power level
WA
K
, K
= Uncertainty
pa
WA
During operation the noise level can exceed
80 dB(A).
Wear ear prote
Publicidad
