Publicidad
Idiomas disponibles
Idiomas disponibles
824
BD824
Opening your life
Code:
1. Power supply port (P7) (Transformer Output)
Transformer speci cation: 120VAC/22VAC
Rated power: 120W
2. Battery and solar panel ports (P5)
Battery speci cation: 12V/9AH
Solar charge controller: 24V
3. Direction sensor port (P3)
4. Motor port (P8)
5. Hall sensor port (P6)
6. Alarm lamp and infrared sensor ports (P4)
Alarm lamp type: LED
Voltage: 12/24VDC
Infrared sensor: NC
7. External button and antenna ports (P1)
FIG.11
External button: NO
5.2 Operation Interface Instruction
Indicator Lights:
L0 (Green): Indicating the control board working status and menu status.
L1-L5 (Red): Indicating the settings, parameters and errors.
Setup Buttons
PROG: Enter into or exit the setting menu.
- and +: Functions selection and parameter adjustment.
SET: Travel Limit Position Setting, Enter into the selection, save the setting.
5.3 Travel Limit Position Setting
Note:
The travel limit position must be settled according to the gate travel length after the rst installation
of the gate opener.
5.3.1 Operation Instruction for Travel Limit Position Setting:
A. Operation Instruction
1. Enter into Setting Mode:
FIG.12
a.Press "SET" for 3sec to con rm to reset the travel limit position. The indicator lights will be on in sequence from L5 to L1.
www.accessmatic.com
Opening your life
10
Publicidad
