Publicidad
Idiomas disponibles
Idiomas disponibles
824
BD824
Opening your life
Code:
5.6 Remote Control Intelligent Learning
Remote control intelligent learning function enables users to program the remote controls to the control board without dismantling the
machine.
Precondition:
1. To have one piece of remote control that has already been programmed.
2. To ensure the reliability of learning, please operate the intelligent learning function within 2 meters away from the machine.
3. Please make sure that the gate opener is equipped with an alarm lamp, which will help you to check the status of remote control
learning.
A. Operation Instruction:
1. Simultaneously press and hold the third and fourth buttons of the programmed remote control for 3 sec. The alarm lamp will ash,
which indicates that the learning function of the control board is on working.
2. Press the button to be learned on the remote control under the above status. The alarm lamp will be on for one sec. Remote control
learning is nished.
3. The system will automatically exit the learning mode after waiting for 20 seconds.
1.4 Basic Menu Setting
Operation Instruction:
1. Press and hold "PROG" button for 3 sec under the control board standby mode, the indicator light L0 will icker once, and then enter
into basic menu setting.
2. Di erent functions can be selected through "+" and "-" buttons.
3. Press "SET" button to enter into the corresponding selection to set the parameters.
www.accessmatic.com
Opening your life
14
Publicidad
