Publicidad
Idiomas disponibles
Idiomas disponibles
Washing a load of laundry
ATC (Auto Temperature Control)
ATC is the control function that the
washer controls water temperature with
temperature sensor (thermistor).
NOTE
Because there are numerous water
temperatures depending on the customer's
environments (cold areas, warm areas,
various water temperatures, settings of
heater temperature, etc.), ATC function in our
washer maintains the certain level of wash
temperature to output the best washing
performance at each cycle.
Detergent use
For the best cleaning results, use a high
efficiency detergent such as Tide HE, Wisk
HE, Cheer HE or Gain HE*. High efficiency
detergents contain suds suppressors that
reduce or eliminate suds. When fewer
suds are produced, the load tumbles more
efficiently and cleaning is maximized.
(* Brand names are trademarks of their
respective manufacturers.)
WARNING
For best results, use HE detergents only.
Do not use non-HE detergent, organic
detergent, natural detergent or HE
detergents with natural ingredients (such as
vinegar, baking soda).
36 English
WA3000A_DC68-03850F-00_EN.indd 36
WA3000A_DC68-03850F-00_EN.indd 36
NOTE
If you select NORMAL cycle, this cycle is the
regulation and UL cycle. Since new washers
must reduce the amount of energy usage as
a first priority, customers will notice more
cold water entering the washer. But, this is
normal, not a problem.
In those regulation cycles, Hot temperature
is similar to acceptable adult bath-water
temperature and warm temperature is
similar to comfortable swimming-pool water
temperature.
NOTE
If customers want to wash clothes in specific
water temperatures, customers should
choose a different cycle at each temperature
(Hot/Warm/Eco Warm/Cool).
NOTE
Reducing the amount of detergent
may reduce the quality of cleaning. It
is important to pre–treat stains, sort
carefully by color and soil level, and avoid
overloading.
2020-12-07
2020-12-07
4:21:03
4:21:03
Publicidad
