Care And Cleaning - GE Profile GXCF35GBS Manual Del Propietário

Ocultar thumbs Ver también para Profile GXCF35GBS:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Care and cleaning of the dispenser.
To remove
To replace
Support
collar
Separator
Drip tray grille
Drip tray
10
Cleaning the Separator
IMPORTANT: Unplug the water dispenser before
cleaning.
1. Remove the water bottle and drain the
dispenser (see Draining the Dispenser).
2. Remove the support collar by turning
counterclockwise and pulling straight off.
3. Remove the plastic separator by pulling straight
out (you may need to twist slightly to loosen).
4. Clean the separator with dish soap and water
or in the top rack of the dishwasher.
Cleaning the Outside Cabinet and Storage/Chiller Compartment
IMPORTANT: Unplug the water dispenser before
cleaning.
The cabinet and compartment of the dispenser
can be washed with mild soap and water. Rinse
thoroughly with clear water. Never use commercial
cleaners or abrasive scouring powders.
Cleaning the Inside of the Chiller Compartment
To help prevent odors, leave an open box of baking
soda in the chiller compartment.
Unplug the dispenser before cleaning.
Use warm water and baking soda solution—about
a tablespoon (15 ml) of baking soda to a quart
(1 liter) of water. This both cleans and neutralizes
odors. Rinse and wipe dry.
Cleaning the Drip Tray and Grille
The dispenser drip tray is not self-draining.
To reduce water spotting or deposits, the tray and
its grille should be emptied, cleaned and wiped
dry regularly.
5. Dry the separator thoroughly on both sides.
6. Using a clean cloth or paper towel, thoroughly
dry the cold water reservoir.
7. Place the separator back in the dispenser. Make
sure the long, tapered end of the separator is
positioned firmly on the metal plug on the
bottom of the reservoir.
8. Replace the support collar and turn clockwise
until it is firmly in place.
9. Install a full water bottle on the dispenser
(see Loading the Dispenser).
Sweep away or vacuum any dust from the
condenser coils on the back of the unit. For best
results, use a brush specially designed for this
purpose. It is available at most appliance stores.
Clean other parts of the chiller compartment—
including door gaskets and all plastic parts—
the same way.
Clean with mild soap or on the top rack in the
dishwasher.

Publicidad

Tabla de contenido
loading

Tabla de contenido