Descargar Imprimir esta página

GE JM250 Manual Del Propietário página 18

Publicidad

Idiomas disponibles

Idiomas disponibles

Oven Door
Do not lift the door by the handle.
To remove the door:
Open it to the broil stop position. Grasp firmly on each
side and lift the door straight up and off the hinges.
Do not place hands between the hinge and the oven
door frame.
To replace the door:
Make sure the hinges are in the broil stop position.
Position the slots in the bottom of the door squarely over
the hinges and slowly lower it over both hinges.
To clean the inside of the door:
the self-clean cycle, you do not need to clean this by
hand.
be cleaned with a soap-filled steel wool or plastic
pad, hot water and detergent. Rinse well with a
vinegar and water solution.
Lift the door straight up and off the hinges.
18
To clean the outside of the door:
sides and front of the oven door. Rinse well. You may
also use a glass cleaner to clean the glass on the
outside of the door. Do not let water drip into the vent
openings.
and basting materials containing acids may cause
discoloration and should be wiped up immediately.
When surface is cool, clean and rinse.
abrasives on the outside of the door.
(appearance may vary)
The gasket is designed with a gap
at the bottom to allow for proper air circulation.
extremely low resistance to abrasion.
If you notice the gasket becoming worn, frayed or
damaged in any way or if it has become displaced
on the door, you should have it replaced.
49-2000905 Rev. 2

Publicidad

loading

Este manual también es adecuado para:

Jm250dtbbJm250dtww