Troubleshooting Tips ...
Problem
Unable to get the display to
show "SF".
Control signals after entering
cooking time or start time.
Oven racks are difficult to
slide.
Steam from the vent.
49-2000905 Rev. 2
Possible Cause
Oven control pads were not touched
properly.
You forgot to enter a bake temperature or
cleaning time.
The shiny, silver-colored racks were
cleaned in a self-clean cycle.
When using the ovens, it is normal to see
steam coming out of the oven vents. As the
number of racks or amount of food being
cooked increases, the amount of visible
steam will increase.
What To Do
The BROIL HI/LO and BAKE pads must be touched at the same
time and held for 3 seconds.
Touch the BAKE pad and desired temperature or the SELF
CLEAN pad and desired clean time.
Apply a small amount of vegetable oil to a paper towel and wipe
the edges of the oven racks with the paper towel. Do not spray
with Pam
®
or other lubricant sprays.
This is normal.
21