Publicidad
Idiomas disponibles
Idiomas disponibles
PRODUCT OVERVIEW
Exterior Parts
1
2
3
4
Control Panel
1
Door Handle
2
Front Cover
3
Lower Cover
4
Shipping Brace
5
Safety Cover
6
SignaLight™
7
Base
8
Leveling Feet
9
NOTE
• Do not remove the safety cover at any time.
• To ensure reliability, each LG dishwasher goes through thorough quality control before it leaves the factory.
• You may find water droplets or water spots from this process inside your new dishwasher.
SignaLight
(Front Display)
™
The top-control models have 3 indicator LEDs centered at the top of the front cover.
• Red : Error (See the Error Codes in Troubleshooting section.)
• White (steady): Normal operation.
• White (blinking): Cycle has been paused. (After four minutes in pause mode, the machine turns off.)
• Green: Cycle finished normally.
The default "ON" setting keeps the green light on until the door is opened. If the setting is changed to "OFF",
the green light turns off after 90 seconds. To change the setting, turn the power on and press and hold the
High Temp button for 3 seconds until "ON" or "OFF" appears in the display. The setting is stored until you
change it.
5
6
1
2
7
3
8
4
9
PRODUCT OVERVIEW
5
6
7
8
9
9
Publicidad
