Publicidad
Idiomas disponibles
Idiomas disponibles
Battery Installation
1) Slide the battery compartment release knob on
the handstrap to the Open position to release
the battery holder.
2) Insert two new size AA alkaline batteries.
3) Attach the battery holder to the handstrap and
slide the release knob to the locked position to
secure the compartment.
Sliding the release knob
Open
(Remove the battery
holder.)
18
Close
(Secure the battery
holder.)
WARNING
• Use the same type of batteries. Do NOT mix old and new batteries. Doing so can cause
leakage or rupture.
• When changing the batteries outdoors, be sure not to let any water get into the battery
compartment.
• If you plan to leave the binoculars stored for a prolonged period, remove the batteries in
order to prevent natural discharge and/or leakage.
When the batteries are removed, keep the battery holder attached to the handstrap to
protect the internal contact points.
• Keep the contact points away from any metal. Damage could result.
• NEVER slide the stabilization lever to the ON position if you do not have two batteries
installed. Damage could result.
Publicidad
