Publicidad
Idiomas disponibles
Idiomas disponibles
How to use the handstrap
Installing the Neckstrap
1) Make a large loop at each of the neckstrap
3) Lead the strap inside the loop and through
the buckle and pull tight. Do the same with
the outer loop.
The binoculars can be more securely held when you slip
your hand through the handstrap.
Slip your hand through the handstrap and adjust the belt
length.
To tighten the strap, pull the belt on the eyepiece end.
To loosen the strap, lift the buckle on the backside of the
handstrap and pull on the belt.
WARNING
The handstrap also serves as the battery holder. Do NOT
apply strong force or remove the strap from the
binoculars. Damage could result.
2) Insert strap through neckstrap bracket
4) Do the same with the opening in the
binoculars to attach the strap on the other
side.
19
Publicidad
