LG WT4801CW Manual Del Propietário página 24

24
USING YOUR WASHING MACHINE
Setting soil level of laundry,
SOIL LEVEL
You can wash your laundry more thoroughly by setting the
proper soil level on the washing machine.
1
Press and press to the desired cycle.
2
Press repeatedly to select a soil level.
- When an optional item is selected, an indication light for
the corresponding optional item turns on.
3
Press the desired option to use the other options.
- Skip to step 4 to use the default setting without
changing the options.
4
Press .
NOTE
This feature needs more time for heavily soiled loads or
y
less time for lightly soiled loads.
Setting spin speed, SPIN SPEED
You can set the desired spin speed.
Use this feature properly according to the characteristics of
the load.
1
Press and press to the desired cycle.
2
Press repeatedly to select the desired spin speed.
- When an optional item is selected, an indication light for
the corresponding optional item turns on.
3
Press the desired option to use the other options.
- Skip to step 4 to use the default setting without
changing the options.
4
Press .
NOTE
The Spin Speed button also activates the Drain & Spin
y
cycle to drain the tub and spin clothes; for example,
if you want to remove clothes before the cycle has
ended.
Tuning on/off melody and button tones,
SIGNAL ON/OFF
The washing machine plays a melody when the wash cycle
is finished. The buttons make a sound each time a button is
pressed. The melody and button tones can be adjusted the
volume as desired.
A
djusts the volume of the end-of-cycle signal or
turns it off.
Setting add garments of laundry,
GARMENTS
Laundry may be added to the load at the
proper time in the wash cycle. When the ADD
GARMENTS light is illuminated, it is safe to
pause the cycle and add more items to the load.If garments
are added when the ADD GARMENTS light is off, the washer
will not adjust for these items which could result in pooer
performance or fabric damage.
To add garments while the ADD GARMENTS light is on:
1 Press button to pause the washer.
2 Open the lid when it unlocks
3 Add your additional items.
4 Close the lid.
5 Press button to resume the wash cycle.
NOTE
If the washer remains idle for 8 minutes after pausing
y
the cycle, the water in the tub will drain.
Presetting the start time,
You can set the desired start time.
1
Press and press to the desired cycle.
2
Press the desired option to use the other options.
3
Press repeatedly to select the desired start time.
- light will turn on.
- The set start time appears on the display panel.
- Each press of the button increases the delay time by
one hour, up to 24 hours.
4
Press .
ADD
DELAY WASH