LG WT4801CW Manual Del Propietário página 9

Control panel features
LED
Display
Power
Button
Operation
Button
Option
Selection
Button
Wash Soil Spin
Temp. Level Speed
Selection Selection Selection
Button Button Button
POWER ON/OFF BUTTON
y
- Press to turn the washer ON. Press again to turn the washer OFF.
NOTE: If the washer remains idle for 4 minutes after turning the washer off, the water in the tub will
drain.
NOTE: An alarm will sound 1 minute prior to draining, and 'dr' will appear on the display. You may
restart the washer at this time. However, once the washer initiates draining, all functions will
be suspended, and 'dr' will be displayed until draining is complete.
CYCLE SELECTOR BUTTON
y
- Press the Cycle Selector Button until the desired cycle is selected. Once the desired cycle has been
selected, the standard presets will be shown in the display. These settings can be adjusted using
the cycle setting buttons before starting the cycle.
START/PAUSE BUTTON
y
- Press this button to START the selected cycle.
If the washer is running, use this button to PAUSE the cycle without losing the current settings.
NOTE: If you do not press the START/PAUSE button within 4 minutes of selecting a cycle, the
washer automatically turns off.
NOTE: If the washer remains idle for 8 minutes after pausing the cycle, the water in the tub will
drain.
LED DISPLAY
y
- The display shows the settings, estimated time remaining, and status messages for your washer.
The display will remain on through the cycle.
OPTION BUTTONS
y
- The option buttons allow you to select additional cycle options and will light when selected.
CYCLE MODIFIER BUTTONS
y
- Use these buttons to select the desired cycle options for the selected cycle. Press the button for
that setting until the indicator light for the desired value is lit.
Certain buttons also allow you to activate special functions by pressing and holding the button for 3
seconds. For detailed information about the individual options, please see the following pages.
INTRODUCING YOUR WASHING MACHINE
Signal Cycles Start/
Selection Selection Pause
Button Button Button
Description
9