Publicidad
Idiomas disponibles
Idiomas disponibles
1. Cover (A)
4. Engine side
2. Cover (B)
5. Shaft tube side
3. Throttle cable
1. Clip
3. Throttle cable
2. Flexible shaft assembly
1. Screw M5×35
4. Nut
2. Front handle
5. Hanger
3. Bracket
6. Shaft tube
1. Front handle
3. Strap
2. Hanger
All manuals and user guides at all-guides.com
The length of inner cable can be adjusted for proper pulling by
opening cover (B) and resetting flange of throttle cable into a
suitable groove on the left or right.
The 2 pieces of clip attached to flexible shaft assembly must
be set to appropriate positions on the throttle cable (at epual
distance on the whole length of the flexible shaft assembly).
Loop handle
Assemble the front handle and bracket on the shaft tube
loosely.
Adjust the location of the front handle to a convenient position.
Tighten the screws (M5×35) and nuts securely. - One of the 4
screws must be tighten together with the hanger as illustrated.
Shoulder harness
Suit the length of knapsack band to comfort.
As the strap is elastic and adjustable, it is preferable to con-
nect the strap to the hangers located on the front handle and
the left or right knapsack band to maintain a fatigueless and
comfortable operation.
17
Before you start
Publicidad
