Thermador T24IW901SP Manual De Uso Y Cuidado página 13

T his appliance is Wi-Fi-capable and can be
H o m e C o n n e c t
controlled remotely using a mobile device.
The appliance is not connected to a home
network.
The availability of the Home Connect function
depends on the availability of Home Connect
services in your country. Home Connect services
are not available in every country. You can find
more information on www.home-connect.com.
Wait at least 2 minutes after switching on the
appliance before setting up Home Connect. Only
then is internal appliance initialization complete.
Take note of the Home Connect supplementary
sheet, which is supplied with the appliance or is
available for download at www.thermador.com
together with the instructions. Enter the E-number
of your appliance in the search field.
You can connect your appliance to the home WLAN
network (Wi-Fi) in 3 basic steps.
Install the app.
Connect your refrigerator to the home WLAN
network (Wi-Fi).
Connect the refrigerator to the Home Connect
app.
The first time you open the menu, you will be
automatically guided through initial setup. Follow the
instructions on the control panel. For further
information, please also see the following chapters.
The following sub-menus can be found in the Home
network menu:
Connection
Connect to app
Software update
Delete network settings
To open the Settings menu, press the : button.
Use ( button to move to the menu item Appliance
settings.
Press 8 button.
Press ( button to move to the menu item WiFi.
Press : button.
Install the Home Connect app on your mobile
device.
Open the Home network menu on your
refrigerator.
Open the app on your mobile device.
Log in or register with the app if access is not yet
available.
Check the router of your home network to see if a
WPS function is available for automatic
connection.
If this function is available, start automatic
network connection with 8 button.
Follow the instructions on the control panel.
Start manual network connection if this function is
not available, if you're not sure whether the
function is available, or if automatic network
connection failed.
The refrigerator temporarily generates its own
network for connecting the mobile device.
Start manual network connection in the app of
your mobile device.
As soon as the refrigerator is connected to the
mobile device, a connection between the refrigerator
and your home network is established.
Place the router closer to the refrigerator.
Check that screening walls do not interfere with
the connection.
Install a repeater to make the signal stronger.
Home Connect en-us
13