Publicidad
Idiomas disponibles
Idiomas disponibles
USB Fan Use instructions
PRODUCT DESCRIPTION (fig 1)
1. Blades
2. Grid
3. Base
4. USB line
5. ON/OFF button
6. Adapter
USE
1.Plug the USB line (included) into the fan and into a USB port or plug it to the socket with the adapted provided.
Use the ON/OFF button to switch it on and off.
Attention: don't install battery during using usb power supply. Usb and battery can't use at the same time.
CLEANING
Before cleaning switch off the fan.
Cleaning the fan with a soft cloth, eventually lightly wet with water. Do not use alcohol or chemicals substances
as thinners or other detergent.
Do not spray water or liquids on the fan, to prevent from damages.
Dry every parts before using again the fan.
If not used during the winter period, keep the appliance in a dry and clean place.
TECHNICAL DATA
Use USB cable and adaptor included
USB DC: 5V
Power: 2,5 W
For any improvement reasons, Beper reserves the right to modify or improve the product without any
notice.
The European directive 2011/65/EU on Waste Electrical and Electronic Equipment (WEEE), requires
that old household electrical appliances must not be disposed of in the normal unsorted municipal
waste stream. Old appliances must be collected separately in order to optimize the recovery and
recycling of the materials they contain, and reduce the impact on human health and the environment.
The crossed out "wheeled bin" symbol on the product reminds you of your obligation, that when you
dispose of the appliance, it must be separately collected.
9
EN
Publicidad
