Publicidad
Idiomas disponibles
Idiomas disponibles
FAULT
Your machine vibrates.
Excessive foam is formed in the
detergent drawer.
Unsatisfactory washing result.
92
POSSIBLE CAUSE
The feet have not been adju-
sted.
Transit bolts fitted for transpor-
tation have not been removed.
Small load in the drum.
Your machine is overloaded
with laundry or laundry is une-
venly spread.
Your machine rests on a hard
surface.
Excessive amount of detergent
used.
Wrong detergent used.
Your washing is too dirty for the
programme selected.
Amount of detergent used
insufficient.
There is too much laundry in
your machine.
TROUBLESHOOTING
Adjust the feet. (**)
Remove the transit bolts from
the machine. (**)
This will not prevent operation
of your machine.
Do not overload the drum. Spre-
ad laundry evenly in the drum.
Do not set up your Washing
Machine on a hard surface.
Press the Start/Pause button.
To stop the foam, dilute one
tablespoon of softener into 1/2
litre of water and pour into the
detergent drawer. Press the
Start/Pause button after 5-10
mins.
Only use detergents produced
for automatic Washing Ma-
chines.
Use the information in the
programme tables to select the
most appropriate programme.
Use the amount of detergent as
instructed on the packaging.
Check that the maximum
capacity for the selected
programme has not been
exceeded.
Publicidad
