Publicidad
Idiomas disponibles
Idiomas disponibles
1. on/off switch
2. smartselect
3. removable Water tank
4. handle
5. steam head
6. Micro-fiber cleaning Pad
7. Bottom cord hook
8. top cord hook
9. hanging Bracket
notIce:
each steam mop is 100% tested in the factory to ensure product
performance and safety. When assembling your new steam mop for the first time you
may notice water residue inside of the unit.
WarnInG:
appliance is switched off and unplugged and that the appliance is cold and contains
minimal or no water.
attachInG the handLe - fig. B& I
• With the cord hooks (8 & 9) toward the back of the
appliance, slide the bottom end of the handle tube (4)
into the top end of the steam mop body (10) until it is
firmly seated and clicks into place.
attachInG the steaM head - fig. c
• Slide the bottom end of the steam mop body (10)
onto the steam head (5) until it clicks into place.
• The steam head can be removed from the steam
mop body by pressing the steam head release
button (11) and pulling the steam mop body (10) off
the steam head (5).
attachInG the Water tank
• Clip the water tank (3) onto the handle (4).
• Slide the water tank down into the steam mop body
(10), ensure that the water tank is firmly seated.
functIonaL descrIPtIon
dial
tM
asseMBLy
Before attempting any of the following operations, make sure that the
0
a
4
B
c
0
0
0
Publicidad
