Publicidad
Idiomas disponibles
Idiomas disponibles
12 Smart Control
13 Power
14 Start/Pause
(Hold to Start)
Icon description
Garment+
Lid Lock
SELF CLEAN
reminder
Child Lock
Alarm Off
Wi-Fi
Untitled-7 37
Untitled-7 37
After connecting the washer to your home network using the
SmartThings app, you can control the washer remotely. When
started, the Smart Control indicator blinks and the front door locks.
The washer enters waiting mode and waits for remote commands.
(For more information about Smart Control , visit the SmartThings
app page.)
Press to turn the washer on or off.
Press and hold to start operation or press to stop operation
temporarily.
• This icon indicates you can add or take out items after a cycle
has started.
• To add or take out items, press Start/Pause (Hold to Start) to
pause the cycle, and then open the lid. To resume the cycle,
close the lid, and then press and hold Start/Pause (Hold to
Start) .
• This icon indicates the lid is locked and cannot be opened.
• The lid locks automatically during a cycle and this indicator
turns on.
• You can open the lid when this icon disappears.
• This icon indicates that you should clean the drum using the
SELF CLEAN cycle.
• After every 20 cycles, this icon appears for an hour and
then turns off automatically. The icon will appear for 5 more
cycles, turn off, and then will not appear for another 20
cycles.
• This icon indicates that Child Lock is on.
• For more information about Child Lock , see page 45.
• This icon indicates that the alarm is off.
• This icon indicates that the washer is connected to Wi-Fi.
English 37
2022-06-30
2022-06-30
3:38:07
3:38:07
Publicidad
