Silverline 999038 Traducción Del Manual Original página 5

b) Use personal protective equipment. Always wear eye protection. Protective equipment
such as a dust mask, non-skid safety shoes, hard hat or hearing protection used for appropriate
conditions will reduce personal injuries.
c) Prevent unintentional starting. Ensure the switch is in the OFF-position before connecting
to power source and/or battery pack, picking up or carrying the tool. Carrying power tools
with your finger on the switch or energising power tools that have the switch ON invites accidents.
d) Remove any adjusting key or wrench before turning the power tool ON. A wrench or a key
left attached to a rotating part of the power tool may result in personal injury.
e) Do not overreach. Keep proper footing and balance at all times. This enables better control of
the power tool in unexpected situations.
f) Dress properly. Do not wear loose clothing or jewellery. Keep your hair and clothing away
from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.
g) If devices are provided for the connection of dust extraction and collection facilities,
ensure these are connected and properly used. Use of dust collection can reduce
dust-related hazards.
h) Do not let familiarity gained from frequent use of tools allow you to become complacent
and ignore tool safety principles. A careless action can cause severe injury within a fraction
of a second.
4) Power tool use and care
a) Do not force the power tool. Use the correct power tool for your application. The correct
power tool will do the job better and safer at the rate for which it was designed.
b) Do not use the power tool if the switch does not turn it ON and OFF. Any power tool that
cannot be controlled with the switch is dangerous and must be repaired.
c) Disconnect the plug from the power source and/or remove the battery pack, if
detachable, from the power tool before making any adjustments, changing accessories,
or storing power tools. Such preventive safety measures reduce the risk of starting the power
tool accidentally.
d) Store idle power tools out of the reach of children and do not allow persons unfamiliar
with the power tool or these instructions to operate the power tool. Power tools are
dangerous in the hands of untrained users.
e) Maintain power tools and accessories. Check for misalignment or binding of moving
parts, breakage of parts and any other condition that may affect the power tool's
operation. If damaged, have the power tool repaired before use. Many accidents are caused
by poorly maintained power tools.
f) Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges
are less likely to bind and are easier to control.
g) Use the power tool, accessories and tool bits, etc. in accordance with these instructions,
taking into account the working conditions and the work to be performed. Use of the power
tool for operations different from those intended could result in a hazardous situation.
h) Keep handles and grasping surfaces dry, clean and free from oil and grease. Slippery
handles and grasping surfaces do not allow for safe handling and control of the tool in
unexpected situations.
5) Service
a) Have your power tool serviced by a qualified repair person using only identical
replacement parts. This will ensure that the safety of the power tool is maintained.
Wallpaper Steam Stripper Safety
• Do not handle the product with wet hands. Do not use the wallpaper stripper in wet
environments or on wet floors
• Fill the water tank, and tighten safety cap securely before connecting to power supply
• Do not tilt the product by more than 45˚. Tilting the product too far may allow boiling
water to be ejected
• Never direct steam towards people, animals, or electrical equipment
• Always disconnect power supply before filling or cleaning
• Allow the product to cool completely before opening tank cap
• Do not use any form of rust or calcium remover in this product
• Do not overfill the water tank
• Disconnect from power on completion of the task
• This appliance shall not be left unattended while it is connected to the mains power supply
• Do not remove the tank cap during use, or whilst the machine is connected to the mains
• The appliance is not to be used if it has been dropped, or if there are visual signs of damage
• Keep the appliance out of reach of children whilst it is energised or cooling down
DIY 2200W Steam Wallpaper Stripper
Product Familiarisation
1 Water Tank
2 Safety Valve
3 Tank Cap
4 Handle
5 Steam Pad
6 Hose
Intended Use
Mains-powered steam cleaner capable of removing all types of wallpaper without the need for
harmful chemicals.
Unpacking Your Tool
• Carefully unpack and inspect your new tool. Familiarise yourself with all its features
and functions
• Ensure that all parts of the tool are present and in good condition. If any parts are missing or
damaged, have such parts replaced before attempting to use this tool
Before Use
WARNING: Ensure the tool is disconnected from the power supply before attaching or
changing any accessories, or making any adjustments.
Assembly
• Attach the Hose (6) to the Water Tank (1) by gripping the Hose end and installing it to
the Safety Valve (2)
• Grip the Hose firmly and fasten it to the Steam Pad (5)
Note: Ensure that the Hose is securely attached to both the Water Tank and Steam Pad; otherwise it
may lead to boiling water leaking onto the work area.
Filling
Note: Do not exceed the maximum capacity of the water tank.
• Ensure that the product is unplugged and cool, and that all steam has been released
through the Steam Pad (5)
• Place the product on a level surface then unscrew the Tank Cap (3)
• Fill the Water Tank (1) to the required level, maximum capacity 4.5Ltr
• Securely fasten the Tank Cap (3) to the Water Tank
Operation
WARNING: ALWAYS wear eye protection, adequate respiratory and hearing protection, as well
as suitable gloves, when working with this tool.
WARNING: Caution when stripping wallpaper from delicate surfaces. The high temperature steam
may cause damage to the base surface.
IMPORTANT: When in use, ALWAYS keep the water level in between the min and max line. DO NOT
overfill; DO NOT let the device run dry. If the device runs dry, it may cause damage. Monitor the
water level consistently during use.
Switching ON & OFF
• With the Water Tank (1) full and the Tank Cap (3) securely fastened, plug the power cord into
the mains outlet
• After 15 minutes, the wallpaper stripper will be ready for use
Note: Steam will be ejected from the Steam Pad (5) once the fluid has reached normal operating
temperature.
Wallpaper stripper tips
WARNING: When the Water Tank (1) is full, the wallpaper stripper has an approximate
operating time of 70 minutes. Do not allow the Water Tank to run dry, or run the tool for longer
than 70 minutes.
• Use a wallpaper perforator (not included) on the wall prior to steam stripper use, to help the
steam to penetrate the surface
• When the wallpaper stripper has reached normal operating temperature, hold the Steam Pad (5)
against the wall. Do not hold the Steam Pad against the wallpaper for longer than 10 seconds
• Use a suitable scraper to remove the wallpaper
• When the wallpaper stripper is running low on water, disconnect from the mains and allow to
cool before opening the Tank Cap (3) and refilling
silverlinetools.com
5