English
8
The brush strip for cleaning hard floors comes out of the housing. At the same time, the
,
wheel is lifted to prevent scratching and to increase manoeuvrability.
To clean carpets, push the rocker switch again (Fig. 9).
The brush strip disappears into the nozzle housing and the wheel is lowered automatically.
,
Combination nozzle (specific types only)
The combination nozzle can be used on either carpets or hard floors.
1
To clean hard floors, push the rocker switch on top of the nozzle with your foot (Fig. 10).
The brush strip for cleaning hard floors comes out of the nozzle housing.
,
To clean carpets, push the rocker switch again (Fig. 11).
The brush strip disappears into the nozzle housing.
,
Crevice tool, small nozzle and small brush
1
Connect the crevice tool (1), the small nozzle (2) or the small brush (specific types only) (3)
directly to the handgrip or to the tube (Fig. 12).
Accessory clip (specific types only)
1
Snap the crevice tool and the small nozzle into the clip.
Snap the accessory clip onto the tube (Fig. 13).
Accessory holder (specific types only)
1
Snap the accessory holder onto the handgrip (Fig. 14).
Snap two accessories into the accessory holder:
-
Crevice tool and small nozzle (Fig. 15).
Note: Make sure the suction opening of the small nozzle points away from the holder.
-
Crevice tool and small brush (Fig. 16).
Note: Make sure the suction opening of the small brush points towards the holder.
using the appliance
1
Pull the cord out of the appliance and put the mains plug in the wall socket.
Press the on/off button on top of the appliance with your foot to switch on the appliance
(Fig. 17).
During vacuum cleaning, you can adjust the suction power with the knob on top of the
appliance (Fig. 18).
-
Use maximum suction power to vacuum very dirty carpets and hard floors.
-
Use minimum suction power to vacuum curtains, table carpets, etc.
If you want to pause for a moment, insert the ridge on the nozzle into the parking slot to
park the tube in a convenient position (Fig. 19)
Active Fragrance Control (specific types only)
The scent granules have been specially developed for use in your Philips vacuum cleaner. Only use
the Philips s-fresh` scent granules in your vacuum cleaner.
If the vacuum cleaner is equipped with Active Fragrance Control, keep it out of the reach of
children, both during and after use. Store the vacuum cleaner in a locked cupboard if there are
small children in the house.
The scent granules are not edible.
All manuals and user guides at all-guides.com