Operations
08 Damp Alert
09 Drum Light
10 Adjust Time
11 Smart Care
12 Power
13 Start/Pause (Hold
to Start)
NOTE
Do not take extremely tangled items from your washer and put them into the dryer. They
can degrade the drying efficiency of the dryer or cause the door to open. We recommend
that you untangle the items before putting them into the dryer. Also, do not put objects on
the dryer, especially on the control panel.
CAUTION
Do not spray water directly onto the control panel. This may cause a system failure.
38
English
Untitled-16 38
This alert is available for all Sensor Dry cycles except for
SANITIZE and ACTIVEWEAR. Available dry levels are Normal,
More, and Extra.
If a load contains mixed fabrics, the Damp Alert indicator blinks
when average dryness of the items in the load is 80 % dry. This
lets you take items that you don't want fully dried or that dry
quickly out of the dryer early while letting others continue to
dry.
Press to turn the interior lamp on or off. The lamp stays lit for 2
minutes after it has turned on, regardless of whether the power
is on or off or the door is open or closed, and then turns off
automatically.
You can change the set time in the Manual Dry cycles (QUICK
DRY, TIME DRY, AIR FLUFF, and WRINKLE RELEASE) and
WRINKLE AWAY. To change the cycle time, press
the desired time is displayed.
This function enables you to check the status of the dryer using
a smartphone.
Press to turn on/turn off the dryer.
Press to start or stop operation.
or
until
2020-07-14
3:36:20