Ryobi P21014 Manual Del Operador página 10

USING TURBO BOOST
See Figure 4.
 While the switch trigger is depressed, press the turbo
boost button to increase the air flow to the maximum
velocity.
NOTE: The blower will return to normal speed when the
button is released.
USING CRUISE CONTROL
See Figure 4.
The cruise control can be used to operate the blower without
holding the switch trigger.
To engage the cruise control:
 Depress the switch trigger and stop at the desired speed.
 Push the cruise control lever down.
 Release switch trigger.
 To release the cruise control, pull the cruise control lever
all the way up.
OPERATION
OPERATING THE BLOWER
See Figure 5.
 To keep from scattering debris, blow around the outer
edges of a debris pile. Never blow directly into the center
of a pile.
 To reduce sound levels, limit the number of pieces of
equipment used at any one time.
 Use rakes and brooms to loosen debris before blowing.
In dusty conditions, slightly dampen surfaces when water
is available.
 Conserve water by using power blowers instead of hoses
for many lawn and garden applications, including areas such
as gutters, screens, patios, grills, porches, and gardens.
 Watch out for children, pets, open windows, or freshly
washed cars, and blow debris safely away.
 After using blowers or other equipment, CLEAN UP!
Dispose of debris properly.
Battery tools are always in operating condition. Therefore,
switch should always be in the OFF position when not in
use or carrying at your side.
8 — English
WARNING: