Use And Operation - Klarstein 10028899 Manual De Instrucciones

Before frist Use
There may still be some production residues on the appliance. To avoid harmful effects to your health, clean
the appliance thoroughly before initial use.
Important Hints on Use
• Keep children away from the appliance during operation.
• The appliance should only be used when it is fully and correctly assembled!
• Do not reach into the rotating cutters or the feed tube during operation.
• Keep hair and clothing away from rotating parts of the appliance.
• Be careful when handling the cutters; the blades are sharp! When removing or inserting the cutters, only
over touch the plastic parts and never touch the blades themselves!
• Switch off the appliance and pull the mains plug out of the plug socket before you change/remove any
cutters/cutters holder in order to prevent the appliance from accidentally switching on!
• Do not operate the appliance for more than 2 minutes without interruption!
• Do not force food into the feed tube.
• To achieve the best cutting results, we recommend that you chop the food up into smaller pieces before
placing it into the feeding tube.
Inserting/removing the cutters holder
1. Hold the cutters hol-
der tilted slightly to the
right and insert it into
the motor unit.
Inserting/Removing the cutters
1. Insert the cutter into the holder. Make sure that the cutter is seated correctly on the drive shaft.
2. Place the fastener on the drive shaft. Make sure that the fastener is seated correctly on the drive shaft.
3. Turn the fastener anti clockwise to secure the insert.
4. In order to remove the cutter, turn the fastener clockwise to release the cutter.

Use and Operation

2. Rotate the cutter hol-
der anti clockwise until
it engages.
3. To release the cutter hol-
der from the drive shaft,
rotate the cutter holder
clockwise and remove it
from the motor unit.
10