Descargar Imprimir esta página

Orbegozo BP 0600 Manual De Instrucciones página 16

Publicidad

Idiomas disponibles

Idiomas disponibles

BP 0600
− WARNING: do not use the product after a short circuit
SAFE POSITIONING
1. The heater must not be located immediately below a socket outlet
2. For your own safety and that of others: water and electricity are a dangerous combination! Do not use
this heater in the surroundings of a bath, a shower or a swimming pool. Ensure that the appliance cannot
fall into water (bath wash basin, shower cubicle, etc.)
3. Please read the safety information's before using.
4. Do not use the heater on extremely deep-pile carpets!
5. Do not use the heater in an upright position.
FEATURES
230 V ~ 50 Hz, 1000W
The facility of 500/1000W two heating levels adjustments is for your convenience.
There is a tip over switch on the base. When the heater tips over, the electricity will be turned off
automatically.
OPERATION
1. Insert the plug into the suitable socket.
2. Turn the selector until the desired power (500W or 1000W)
3. Turn the selector until OFF position in order to turn off the unit.
4. After use, turn off all switches and pull out power supply plugs.
CLEANING AND MAINTENANCE
The appliance needs only an external regular cleaning.
After use and before cleaning always unplug the appliance and wait till the ítem is cool.
Clean the grilles from dust.
Do not clean the painted parts with emery flour or solvents and use only a moistened cloth.
REPAIR SERVICE
If malfuctions happen during operation, please send it to near by appointed service center. Never
disassemble it by yourself.
16

Publicidad

loading