Publicidad
Idiomas disponibles
Idiomas disponibles
4.
Retire el tornillo inferior, el soporte de la bisagra y la pata de ajuste en la parte inferior del aparato.
hinge. Then remove the adjustable feet from both
Reverse Door
5.
Suelte el pasador de la bisagra de la abrazadera de la bisagra. De la vuelta a la abrazadera y vuelva a
fijar el pasador.
5. Unscrew and remove the bottom hinge pin, turn the bracket over and replace it.
oor
move the bottom hinge pin, turn the bracket over and replace it.
oor
Unscrew
move the bottom hinge pin, turn the bracket over and replace it.
6.
Fije los tornillos, el soporte de la bisagra y la pata de ajuste en el otro lado de la parte inferior.
6. Refit the bracket fitting the bottom hinge pin. Replace both adjustable
feet.
Apriete ligeramente.
Unscrew
fitting the bottom hinge pin. Replace both adjustable
fitting the bottom hinge pin. Replace both adjustable
7. Place the door back on. Ensure the door is aligned horizontally and
vertically, so that the seals are closed on all sides before finally
tightening the top hinge.
7.
Coloque la puerta en su lugar con cuidado. Asegúrese de que la puerta está alineada tanto horizontal
ack on. Ensure the door is aligned horizontally and
t the seals are closed on all sides before finally
como verticalmente, de manera que las juntas estén cerradas por todos los lados antes de unir
p hinge.
completamente la bisagra superior. Vuelva a colocar la bisagra y atornille en la parte superior del
aparato.
ack on. Ensure the door is aligned horizontally and
8. Put the top cover and fix it with 2 screws on the back.
t the seals are closed on all sides before finally
p hinge.
r and fix it with 2 screws on the back.
46
9. Fix the thermostat knob.
r and fix it with 2 screws on the back.
DO1070DV
7
Unscrew
Screw
Screw
screw
screw
Screw
screw
Publicidad
