Descargar Imprimir esta página

AEG SCK818E3FS Manual De Instrucciones página 21

Ocultar thumbs Ver también para SCK818E3FS:

Publicidad

Idiomas disponibles

Idiomas disponibles

Problem
DEMO appears on the dis‐
play.
A
or
or
symbol is
shown instead of numbers
on the temperature display.
If the advice does not lead to
the desired result, call the
nearest Authorized Service
Centre.
8.2 Replacing the lamp
The appliance is equipped with a longlife
LED interior light.
Only service is allowed to replace the
lighting device. Contact your Authorised
Service Centre.
Possible cause
The appliance is in the dem‐
onstration mode.
Temperature sensor prob‐
lem.
8.3 Closing the door
1. Clean the door gaskets.
2. If necessary, adjust the door. Refer
to installation instructions.
3. If necessary, replace the defective
door gaskets. Contact the Authorised
Service Centre.
ENGLISH
Solution
To exit the demonstration
mode, press and hold the
OK button for approximately
10 seconds until you hear a
long sound and the display
turns off for a short time.
Contact the nearest Author‐
ized Service Centre. The
cooling system will continue
to keep food products cold,
but temperature adjustment
will not be possible.
21

Publicidad

loading