Publicidad
Idiomas disponibles
Idiomas disponibles
G
Bottom venting
A
B
DV6850N_DC68-03650D-03_EN.indd 25
C
4.9"(125 mm)
8.
Cover the back opening with a cover
plate (G).
WARNING
Never leave the back opening uncovered.
It must be covered with a cover plate.
1.
Detach the bottom knockout (A).
2.
Pull the duct out of the dryer, and then
remove the screw (B) from the duct.
Set screw (B) aside. You will need it in
a later step.
3.
Cut the duct as shown and keep the
cut portion of the duct (C).
English 25
10/26/2018 3:16:07 PM
Publicidad
