Publicidad
Idiomas disponibles
Idiomas disponibles
Smart Care
If the dryer displays an information
code, you can use Smart Care to check
the status of the dryer on a smartphone.
To use Smart Care, you must have the
Samsung Smart Care app installed on your
smartphone.
NOTE
Smart Care is optimized for Samsung
Galaxy and Apple iPhones. (Not compatible
with some models).
Download the Samsung Smart Washer
app from the Google Play Store or Apple
App store (Search term: "Samsung Smart
Washer/Dryer"), and install it on your
smartphone.
If an information code appears on the
dryer, follow these steps:
1. Simultaneously press and hold Temp.
and Time for 3 seconds to activate
Smart Care.
2. Open the Smart Care app on your
smartphone.
3. Put the smartphone's camera close
to the display of the dryer. The
app automatically recognizes the
information code, and displays
suggestions on your smartphone.
4. If the smartphone fails to recognize the
information code more than twice, type
the information code manually into the
Smart Care app.
DV6850N_DC68-03650D-03_EN.indd 41
CAUTION
• If light is reflected on the display of
the dryer, the smartphone may not
recognize the information code.
• If you hold the smartphone at an angle
to the dryer's display, the smartphone
may not recognize the information
code. For best results, hold the
smartphone so that the front of the
panel and the smartphone are parallel
or nearly parallel.
• After you use this function, the dryer
will delete the record of the information
code from its code log.
English 41
10/26/2018 3:16:15 PM
Publicidad
