Roger Beep; Key Beep - TTI TX-1446 Plus Manual De Instrucciones

To activate the dual watch mode, first select a radio channel (see
Channels) as the primary channel. To select the dual watch
channel press the MODE button until the Dual Watch Icon and
current setting flashes. Use the UP or DOWN button to select the
desired dual watch channel. Press the PTT or MODE button or
wait for 5 seconds to store your choice and activate the dual
watch.
The radio display will alternate between the primary and dual
watch channels and the dual watch icon will appear.
To deactivate the dual watch press the SCAN button.
If you press the PTT button whilst receiving a signal in Dual Watch
Mode the radio will transmit on the currently displayed channel. If
you press the PTT button when no signal is present the radio will
transmit on the primary channel.

Roger Beep

The Roger Beep is a short tone that is automatically added to the
end of your transmissions to tell other users that you have
finished speaking. You can activate or deactivate the Roger Beep
as required.
To change the Roger Beep setting, press the MODE button until
the Roger Beep icon and current setting flashes. Use the UP or
DOWN button to change the setting. Press the PTT or FUNCTION
button or wait for 5 seconds to store your choice.
The Roger Beep icon will appear when Roger Beep is active.

Key Beep

If the Key Beep is activated, your radio will emit a confirmation
tone whenever you use the keypad. You can activate or
deactivate the Key Beep as required.
To change the Key Beep setting, press the MODE button until the
Key Beep icon appears. Use the UP or DOWN button to change
the setting. Press the PTT or FUNCTION button or wait for 5
seconds to store your choice.
The Key Beep icon will appear when Key Beep is active.
17
TX-1446 plus