Velleman PIR105 Manual Del Usuario página 7

6. Cleaning and Maintenance
7. Technical Specifications
V. 01 – 11/12/2017
Setting the Detector
1. Turn the LUX knob until the lamp
switches on.
2. Now, set the switch-off delay with the
TIME knob going from ± 10 seconds to
± 15 minutes.
3. Close the detector with the cover and
tighten the screw.
This appliance does not need any particular
maintenance. However, occasionally wipe it
with a damp cloth to keep it looking new.
Do not use harsh chemicals, cleaning
solvents or strong detergents.
power supply ................... 220-240 V~, 50 Hz
detection range.............................. 6 m max.
detection angle .....................................360°
ambient light .......... < 3-2000 lux (adjustable)
installation height ............................ 2.2-4 m
power consumption ............................. 0.5 W
motion speed detection ................ 0.6-1.5 m/s
working temperature ........................ < 24 °C
working humidity ..........................< 93% RH
max. rated load
resistive ......................... 1200 W (230 V~)
inductive ......................... 300 W (230 V~)
IP rating .............................................. IP44
switch type.......................................... relay
relay output .................. normally open (N.O.)
switch-off delay ............... ± 10 s to ± 15 min
dimensions ............................. Ø 88 x 46 mm
PIR105
7 ©Velleman nv