Descargar Imprimir esta página

Black and Decker HGS400-LA Manual De Uso Y Cuidado página 16

Publicidad

Idiomas disponibles

Idiomas disponibles

6.
To generate steam, press down on the steam trigger
with your index finger. (I) As long as the trigger is held
down, steam will emit from the steamer. When the
trigger is released, the steam will stop.
To generate a constant flow of steam without
holding the trigger, press the steam trigger and then
slide the continuous steam switch down. (J) This
will activate the continuous steam feature. To turn
the steam off, press the trigger, push the continuous
steam switch up and then release trigger.
7.
With your free hand keep the fabric taut. Steam the
garment with slow, downward strokes, keeping the head
of the steamer in contact with the fabric. (K)
Note: It is normal to feel or hear the water pump in the handle.
Note: If the steamer is left inactive, the auto shut-off
feature will activate, indicated by the rapidly blinking
Power Button. To resume steaming after the auto shut-off
is activated, either press the steam trigger or press the
power button. Allow the steamer to preheat if needed.
8.
When finished steaming, press and hold the power button
until its blue light turns off (about 3 seconds) and unplug
from outlet. (L)
9.
Stand steamer on its base and allow it to completely
cool off before storing. (M) To avoid mineral buildup,
empty the tank after each use.
Auto Shut-Off
The steamer will automatically switch to auto shut-off
mode after being left inactive for 15 minutes. The boiler
and water pump will turn off until reactivated. Rapid
blinking of the power button light indicates that the
steamer is going into auto shut-off mode. To resume
steaming, press the steam trigger or power button and wait for steamer to
fully reheat.
Using Steam Around the Home
Using steam on items that can tolerate hot, damp steam without damage
and inexpensive. Steam upholstery, draperies, linens and home textiles to
refresh.
16
I I
J J
K K
L L
M M

Publicidad

loading