Siemens SIMATIC ET 200SP Instrucciones De Servicio página 85

Homologación cULus HAZ.LOC.
Underwriters Laboratories Inc. según
• UL 508 (Industrial Control Equipment)
• CSA C22.2 No. 142 (Process Control Equipment)
• ANSI/ISA 12.12.01
• CSA C22.2 No. 213 (Hazardous Location)
APPROVED for use in
Class I, Division 2, Group A, B, C, D Tx;
Class I, Zone 2, Group IIC Tx
Installation Instructions for cULus haz.loc.
• WARNING - Explosion Hazard - Do not disconnect while circuit is live unless area is known to
be non-hazardous.
• WARNING - Explosion Hazard - Substitution of components may impair suitability for Class I,
Division 2 or Zone 2.
• This equipment is suitable for use in Class I, Division 2, Groups A, B, C, D; Class I, Zone 2, Group
IIC; or non-hazardous locations.
WARNING: EXPOSURE TO SOME CHEMICALS MAY DEGRADE THE SEALING PROPERTIES OF
MATERIALS USED IN THE RELAY.
Homologación FM
Factory Mutual Research (FM) según
Approval Standard Class Number 3611, 3600, 3810
(ANSI/ISA 82.02.01)
CSA C22.2 No. 213
CSA C22.2 No. 61010-1
APPROVED for use in Class I, Division 2, Group A, B, C, D Tx;
Class I, Zone 2, Group IIC Tx
Installation Instructions for FM
• WARNING - Explosion Hazard - Do not disconnect while circuit is live unless area is known to
be non-hazardous.
• WARNING - Explosion Hazard - Substitution of components may impair suitability for Class I,
Division 2 or Zone 2.
• This equipment is suitable for use in Class I, Division 2, Groups A, B, C, D; Class I, Zone 2, Group
IIC; or non-hazardous locations.
WARNING: EXPOSURE TO SOME CHEMICALS MAY DEGRADE THE SEALING PROPERTIES OF
MATERIALS USED IN THE RELAYS.
O
CPU 1515SP PC2 (F/T/TF)
Instrucciones de servicio, 03/2023, A5E42603477-AC
Datos técnicos
13.1 Normas y homologaciones
83