XO XOS30SMUA Manual De Utilización página 15

Fig.2: Remove the bracket H by loosening the
screws E and throw it away.
a
6" ROUND
FLEXIBLE
METAL
DUCT PIPE
NOT
INCLUDED
Fig.4: Once the air diverter has been in-
serted into the bracket and fastened to
the wall connect the flexible (6" ROUND
FLEXIBLE METAL DUCT PIPE NOT
INCLUDED) pipe to the diverter, use
duct tape to seal.
H
E
a
Fig.3: Center the air diverter A in
the middle of the hood and posi-
tion it as high as needed. Follow the
indicated quotas to drill the holes
and fasten the diverter using the
screws and expansion plugs b1.
E
G
Fig.5: Place the bottom flue G on top of
the frame. Then pull out the top flue F un-
til it meets previously installed diverter.
Screw it all together using the 2 screws E.
- 15 -
7"
= =
b2
F F
b1
E