ACDelco ARS2016 Manual De Información Del Producto página 10

1English1
Installing/Removing Polishing Pads
1. Remove the battery pack.
2. To install, line up the polishing pad with the backing pad and press firmly onto the
tool.
3. To remove, pull the polishing pad off of the backing pad.
NOTE: Use side handles for better control.
Locking the Trigger
Always allow the motor to come to a complete stop before locking the trigger. Always
lock the trigger or remove the battery pack before performing maintenance, changing
accessories, storing the tool and any time the tool is not in use.
To lock the trigger, push the trigger lock from the LOCK side of the tool.
To unlock, push the trigger lock to the UNLOCK side of the tool.
INSTALLING SIDE HANDLE
The auxiliary side handle (3) may be mounted for either left-handed or right-handed
user.
English -9