Publicidad
Idiomas disponibles
Idiomas disponibles
INSTALLING OR REMOVING BATTERY PACK
TO REMOVE BATTERY PACK: Depress the battery pack release button (9) and pull
the battery pack (10) out of tool.
TO INSTALL BATTERY PACK: Push the battery pack (10) onto tool until it locks in
place.
INSTALLING THE BACKING PADS
1. Remove the battery pack.
2. Wipe the accessories and spindle to remove dust and debris. Inspect the parts for
damage. Replace if needed.
3. Press in the spindle lock and thread the backing pad into the spindle. Hand tighten
securely.
4. To remove backing pad, remove the battery pack and reverse the procedure.
1English1
SPECIFICATIONS
Model Number
Voltage
Pad Diameter
Speed
Tool Weight
ASSEMBLY
English
ARS2016
20 Vdc
3"(75 mm)
0-3,000 / 0-7,300 RPM
2.64 lbs (1.20 kg)
-8
Publicidad
