Publicidad
Idiomas disponibles
Idiomas disponibles
CAUTION
When moving your refrigerator
To prevent floor damage, be sure the front
adjusting legs are in the up position (above the
floor).
Refer to "Leveling the Refrigerator" on page 14.
Flat-blade screw
Control Lever
driver (-)
Flooring
For proper installation, you must place this
refrigerator on a level, hard surface that is the
same height as the rest of the floor.
This surface should be strong enough to support a
fully loaded refrigerator.
To protect the finish of the flooring, cut a large
section of the cardboard carton and place it under
the refrigerator where you are working.
When moving the refrigerator, you need to pull and
push it straight forwards or back.
Do not wiggle it from side to side.
DA68-02601D-05.indb 10
REQUIRED TOOLS
Required Tools (Not provided)
You need the following tools to complete the
installation of your refrigerator:
Philips
Flat-blade screw
screwdriver (+)
English - 10
Socket wrench
driver (-)
(13/32") (10 mm)
Allen wrench
(3/16") (5 mm)
2020. 7. 24. 오후 5:41
Publicidad
