Profi Care PC-VL 3111 LB Manual De Instrucciones página 56

MODE Wind Change Functions
The appliance has the two special functions: NAT (NA-
TURE) and SLE (SLEEP). The speed of the fan buries
between the functions.
Press the MODE button to switch these functions on.
NAT Natural Mode
• If the HI (high speed) setting is selected, the speed
alternates between high – medium – low – off.
• If you have selected MI (medium speed), the speed
alternates between medium – low – off.
• In the LO (low speed) setting, the speed alternates
between low – off.
SLE Sleep Mode
• If HI speed is set: The fan works in the first 30 minutes
as in "Natural Mode" at the HI speed setting. In the sub-
sequent 30 minutes the fan works as in "Natural Mode"
at the set MI speed. For the remaining time the fan works
as in "Natural Mode" at the speed setting LO.
• If MI speed is set: The fan works for the first 30 minutes
as in "Natural Mode" at the speed setting MI. For the
remaining time the fan works as in "Natural Mode" at the
speed setting LO.
• If LO speed is set: Switching between low speed and
shut-off of the fan as in "Natural Mode".
NOR Normal
• Select the NOR (NORMAL) function to return to normal
operation.
WARNING:
• Always remove the mains plug before cleaning the appliance.
• If you need to remove the protection grid: Always switch the
appliance of and remove the mains plug.
• Under no circumstances should you immerse the appliance in
water for cleaning purposes. Otherwise this might result in an
electric shock or fire.
CAUTION:
• Do not use a wire brush or any abrasive items.
• Do not use any acidic or abrasive detergents.
Housing
• Clean the outside of the appliance with a dry cloth with-
out any additives.
56
PC-VL3111LB_IM
OSC Oscillation
• If you select the OSC function the appliance oscillates
automatically through a range of approx. 60 degrees.
• In order to switch the function of, press the OSC button
again.
MOIST Mist
The humidifier can be switched on and off regardless of the
fan mode.
Press the MOIST button to select the intensity of the mist:
• LO low
• MI medium
• HI high
To deactivate the function, press the MOIST button again.
Refill Water
1. Switch off the appliance.
2. Disconnect the plug from the mains.
3. If necessary, pour the remaining water out of the tank.
4. Proceed as described under "Fill with Water".
Shutting Off
1. Switch off the appliance.
2. Disconnect the plug from the mains.
3. Empty the water tank and the base of the humidifier
if you do not plan to use the appliance for a lengthy
period.
Cleaning
• If the appliance is very dirty wet a cloth with water and
then wipe the appliance dry once you have finished.
Water Tank
• Rinse the tank with clean water.
• Allow the tank to dry before closing it again.
07.12.22