LG WT1201C Serie Manual Del Propietário página 25

Setting RINSE + SPIN,
Select this option to rinse and spin a load separately from a
regular cycle. This can be helpful in preventing fresh stains
from setting in fabrics. You can change spin speed by
pressing SPIN SPEED repeatedly until the desired speed is
selected.
1
Press the POWER button to turn on the washer.
2
Press the button until the RINSE+SPIN indicator light
is lit. (The cycle light will turn off.)
3
Press the button to start the cycle. The washer will
start automatically.
Setting SPIN ONLY, SPIN ONLY
This button activates the SPIN ONLY cycle to drain and spin.
1
Press the POWER button to turn on the washer.
2
Press the button repeatedly until the SPIN ONLY
indicator light is lit.
3
Press the button to start the cycle. The washer will
start automatically.
Setting soak, SOAK
Helps removes stains by adding a soak time before the end
of the cycle. The cycle time will increase by 3o minutes. The
agitation of the washer will be weaker during a Soak cycle.
NOTE
y You cannot select the Soak option during the Tub Clean
cycle.
RINSE + SPIN
USING YOUR WASHING MACHINE
Saving energy, COLDWASH™
For maximum efficiency, wash only small loads. (less than 8
lbs.)
NOTE
y Press and hold the COLDWASH™ button for three
second to activate or deactivate SIGNAL. SIGNAL is the
melody and button tones.
1
Press , and press
desired cycle is selected.
2
Press The washer will automatically adjust the cycle
settings.
3
Set any other desired options.
4
Press .
NOTE
y When you select the COLDWASH™ option, wash time
will be increased up to 10 minutes.
y For high wash dfficiency, it is recommended to use
less than 8 pounds.
Adding extra rinse cycle,
You can add an extra rinse cycle to the default rinse cycle.
1
Press , and press
desired cycle is selected.
2
Press .
3
Press the desired option to use the other options.
- Skip to step 4 to use the default setting without
changing the options.
4
Press .
25
repeatedly until the
EXTRA RINSE
repeatedly until the